When wearing military boots, you should loosen the laces before using the shoehorn:
Careful use on weekdays is the first step in shoe maintenance. Damaged shoes usually start from the heel. Therefore, you can use shoehorns to wear shoes. You can prepare a long handle at home, but you can usually take it with you. In addition, do not squeeze hard when wearing shoes. Wear leather shoes with laces should develop the habit of loosening the laces.
Use shoe last to prevent deformation of military boots:
To prevent deformation of the shoe, it is best to insert it into the last. Foot shape, walking method, body temperature and humidity, rain and other factors can cause shoes to be out of shape, especially when your feet are sweaty or exposed to rain, you must use shoe lasts to fix the shape of your shoes. Since body temperature and humidity will loosen the leather, it must be set while the body temperature in the shoe is still present.
Do maintenance immediately after purchase:
The new shoes are not coated with shoe polish. To protect the new shoes, rub castor oil on the seams of the soles before they are worn to enhance the waterproof effect. A layer of oil on the upper can make the hard upper shiny and soft. If you want to maintain a long-term luster, you can rub it with fresh milk, and you will receive unexpected results. Doing or not doing the above steps has a lot to do with the speed of aging shoes.
Maintenance method after getting wet:
After the shoes are wetted by rain, make proper disposal immediately so that the shoes will not be deformed. First wipe the white film clean with clean water, and then use a cloth with good water absorption to absorb the moisture on the surface of the shoes. Put newspapers or toilet paper into the shoes, and replace them more so as to completely absorb the moisture. To a certain extent, the shoe last should be put in to prevent deformation. Then place it in a ventilated place to dry in the shade or use a hair dryer to assist in drying from the leather shoes at a low temperature. Do not use high temperature to cause cracks on the upper. After it is completely dry, carefully brush with emulsifying shoe polish, and then maintain it in accordance with the general maintenance method.